Gladiators
Do contact us for availablities
Helmets - Armor - Weapons

Helmets



HL181 - Thraex Helmet in 16 Gauge Tinned Steel - 329€ - Pictures

The thraex fights with a little squaer shields, a curved short sword and two big leg protections. He fights against the murmillo, but also the hoplomachus, or even other thraex.

Our replica is made after a 1st cent helmet.


Made of tinned steel. 42cm high, 37cm deep and 34cm wide. Steel 1.5mm thick. Need to be padded to be weared.

Thraex helmet
Casque de mirmillon


HL185 - Murmillo Helmet in 16 Gauge Bronze - 499€ - Pictures

The mirmillo fights agains the thraex or the hoplomachux, with a big scutum and a short sword, and was one of the more well known arena's foghters..

Our replica may be dated from the 2d or 3d century.

Made of real bronze. 40cm high, 40cm deep and 40cm wide. 1.5mm thick. Need to be padded to be weared. 6kg.



HL180 - Murmillo Helmet in 16 Gauge Tinned Steel
- 319€ - Pictures

This is an iron version of the HL185 helmet.

Our replica may be dated from the 2d or 3d century.

Made of tinned steel. 45cm high, 38cm deep and 32cm wide. Steel 1.5mm thick. Need to be padded to be weared.

Murmillo helmet
secutor helmet


HL183 - Secutor Helmet in 16 G Tinned Steel - 299€ - Pictures

The secutor has the same weapons than the murmillon, for the helmet, made to let the retiarius net glide. He only fights agains retiarius.

First cent helmet.

Made of tinned steel. 35cm high, 30cm deep and 35cm wide. Steel 1.5mm thick. Need to be padded to be weared.



HL182 - Provocator Helmet in 16 G Tinned Steel
- 299€ - Pictures

Provocatores always fight togetherwith medium shield and short sword.

Our helmet is made after a Pompei funding.

Made of tinned steel. 32cm high, 27cm deep and 33cm wide. Steel 1.5mm thick. Need to be padded to be weared.

provocator helmet

gladiator_thracian_helmet


HL171 - THRACIAN Helmet - 1st century - 219€ - Pictures

Made after a piece found in Pompeï, with a gryphon head on the crest. The eye protection tells us it is a beginning of the first century piece.

Made of brass.



HL175 - Gladiator A
- 149€

The shape, between the first and the second century ones, make this helmet a seond hal of the first century one.

Made of iron with brass brackets. Eyeguard made of solid brass.

gladiator_helmet
gladiator_helmet

 

 

HL174 - Gladiator B - 149€ - Pictures


Almost the same than the HL175, it is decorated with a Gorgon head. The bowl is deepeer.

 

HL173 - Gladiator C - 199€ - Pictures


This one is maybe the most well known gladiatorial helmet. during the second century, all the face, and not only the eyes, is protected by a railings. Made of brass.

You may get this copy in iron, with a brass railing and brackets. Just ask for HL177 (iron) - 189€
Pictures

gladiator_helmet
hoplomachus_helmet



HL172 - MIRMILLO HELMET, IIId Century
- 149€ - Pictures


during the IIID century, the crest gets bigger, and the helmet is now higher, less wide.

Made of iron, with a brass railing.


Armor

galerus

MG101 - Shoulder Guard - 99€ - Pictures


Called Galerus, this shoulder guard was used mostly by Raetiarius.

Made of brass.


MG102 - Breast plate - 99€


This plate was weared by Provocatores.


Weapons


SP150 - Triden
t - 50€

The trident was the reatiarius weapon. Sold without the wooden shaft.

Poignard de gladiateur


SW117 - gladiator dolch - 60€

Made after the samples found during Pompei excavations, this dolch is equipped with an exquisite bone handle.

length 49cm.

Pictures



SW117b - gladiator d
olch - 60€

The hilt is made of solid brass, and the blade is in iron

length 47cm, blades's length 31cm.

Pictures

dolch
rudis



MR1043, M1041 et M1042 - Rudis (wooden swords)
30€ - Pictures


From left to rigth
MR1043, cavalry spatha
MR1041, Mainz gladius
MR1042, Pompei gladius

 

 

all helmets are sent without internal padding.

the weapons are not intended for fencing.