Blackpowder muskets and pistols - 18th and 19th centuries
France - England - USA - Powder flasks
Please do contact us for availability and delivery time

Our copies are absolutely true to the originals : size, weight, marks... The firing mechanism is totally functional (the flint is not provided with the gun, though). The vent is not drilled, and the muskets cannot be used for firing. Please read our warning section if you intend to drill it.

Important WARNING




FRANCE

MQ105 - French infantry musket 1728 - 450€

The beginning of the 18th century showed a great improvement in the french army muskets, with the etablishing of a standardized model, the 1717, destined to replace all the various models in use in the french army. He is equiped with a bayonet, following Vauban's advice of 1707.

Our copy is equiped with a steel ramrod.

Length without bayonet 160cm, weigth 4.50kg. 17.5mm caliber. The frizzen cover is case hardened, and the seamless tempered barrel is made of high carbon steel (type:BS970 no.080M40). The breech is threaded.
Sold with its bayonet.


Pictures


MQ101 - French infantry musket 1728, 1746 modified - 450€

The 1717 was soon modified under M de Vallière, to become the 1728 musket. This weapon is a fine example of the elegant curves in musket stocks in the early 18th century. Note especially the shape of the butt.

He will beimproved again in the 1740s, with the standardized use of a steel ramrod in 1743 and, after 1746, the removing of the pan/frizzen bridle.This another copy is soon to be sold.

This weapon was carried by the majority of French troops during the French and Indian War, including the well known "Compagnies franches de la Marine" and the "Regiment de Béarn".

In France, the story of the 1728 ends in 1763, when it is replaced by a shorter a ligther musket, the Charleville. In North America, its carreer carries on, for the french government sold some of them to the US army, which used them during the independance wars

Length without bayonet 156cm, weigth 4.00kg. 18mm caliber. The frizzen cover is case hardened, and the seamless tempered barrel is made of high carbon steel (type:BS970 no.080M40). The breech is threaded.

Pictures


MQ100 - French infantry Charleville 1777 musket with bayonet, An IX modified type - 450€


This musketl was the last in a long line of modifications to the 1728 model French Infantry Musket commonly referred to as the "Charleville" musket (named after one of the arsenals that manufactured them). Some of the unique elements of this model are the finger ridges on the trigger guard, the brass frizzen, and the cheek piece carved in the stock's butt. As mentioned this is the AN IX, or year 9, Napoleonic version with a straighten frizzen cover and slightly different front band. The lock plate has the St. Etienne arsenal markings, along with the appropriate stampings on the breech.

This musket was used by Napoleon's infantry during the 1st Empire, but also in north america and Canada (with an iron frizzen).
2 millions were made, and about 40% of them by the Saint Etienne factory. Maximum firing range is 200m, but 50m is the effectual range of use.

Length without bayonet 153cm, weigth 4.70kg. Bayonet's length 46cm, weigth 0.32kg. Heigth of the gun with bayonet 192cm. 17.1mm caliber. The frizzen cover is case hardened, and the seamless tempered barrel is made of high carbon steel (type:BS970 no.080M40). The breech is threaded.

You may buy the firing mechanisme alone. Reference is MQ150, price is 170€. Of course, if you take the gun MQ100, it is included !

Pictures

An IX firing mechanism, with the Saint Etienne factory mark. Note the place of the vent, which is not drilled.

See the firing mechanism

Marks on the gun, including the type, and the special mark of the controller, and the inspector.


MQ110 - French Cavalry Flintlock Carbine (1777 / AN IX model) - 430€

Introduced during the American Revolution, the carbine offered Light cavalry a short, light, and versatile firearm for close quarter fighting - the typical situation for Light Dragoons and Hussars.

It was in the reign of Napoleon that this firearm (AN IX version) became extensively used. Lancers, Carbiniers a cheval, Artillery Train, and the Line Chasseurs a Cheval all were issued with this carbine. Even the Sapeurs of Infantry Regiments found them ideal for their type of duties.
The holding system (two rings running in a iron bar) even allows to fire without putting the baldric out.


Length 114cm, weigth 3.30kg.The frizzen cover is case hardened, and the seamless tempered barrel is made of high carbon steel (type:BS970 no.080M40). The breech is threaded.

You may buy the firing mechanisme alone.
Reference is MQ151, price is 170€. Of course, if you take the gun MQ110, it is included !

Pictures


MQ108 - Blunderbuss - 380€

In the early 1700s the blunderbussstarted to become popular as a weapon for close quarters because of its ability to deliver a blast of shot or buck and ball. Numerous armies and navies produced various versions of this item all the way into the 1840s. However its zenith seems to have been in the mid-1700s when it was used both by soldiers, sailors, and civilians as a means of defence in close quarters. On board ship often the steel barrels were blackened, or made of brass, as our copy is. As one could imagine, this item was ideal for fighting on ship particularly in repealing of enemy boarding parties.

Barrel made of brass, threaded breech made of steel..
Length 82cm, weight 2.8kg.

Pictures




MQ122 - Flintlock cavalry pistol, 1733 type - 295€

The first standardized cavlary pistol was defined by the 1733 royal act. It was produced by several different manufacturers, with small variations, but all had this typical shape, immediately remaining the beginning of the 17tf century.A clip is used to hold the pistol on a belt.

Length 50cm, weigth 1.1kg.

Pictures




MQ121 - Flintlock cavalry pistol, 1766 type - 295€

This pistol is one of the ancestor of the famous an IX pistol. The shape of the weapon is typical for 18th centuries ones. A clip is used to hold the pistol on a belt.


Length 42cm

Pictures




MQ120 - Flintlock pitol, An IX type - 295€


Bonaparte asked in 1800 a commitee made of artillerymen and weapeon's factories' engineers to conceive a new pistol. The old kinds, as the 1763-1766 one, were in fact too delicate for military duty. The an IX pistol was born... Introduced in 1801 this famous pistol graced the holsters of Napoleon's cavalry at the height of the 1st Empire. In battle this pistol was used both for volley fire and close quarter fighting with other cavalry. As well it proved useful in inflicting harm on packed enemy infantry defensive squares. While another, lighter pistol began to be manufactured in 1807, the "AN IX" pistol continued to be used in Napoleon's cavalry until the end of the Empire in 1815.

Shorter than the old ones, his length is 352 mm, his weigth 1.290kg, has a 17.1mm caliber (7 lines 7 points), the barrel is 201mm long. Note the shape of the grip, which ends with a brass piece, in order to allow the gun to be used as a kind of truncheon, when shot. 66.000 pieces were produced between 1801 and 1807.

The steel used in the barrel is made of tempered seamless modern steel (type:BS970 no.080M40) with a threaded breech plug. The breech area of the barrel possesses the historic model markings and the controller/inspector stamps. The frizzen cover is case hardened

Pictures



USA

MQ109 - 1795 Springfield Flintlock Infantry Musket - 430€


Copied from the 1766 model French musket, the 1795 Springfield infantry musket was the very first official model musket of the United States. Initially with the bayonet lug on the bottom of the barrel, this was rotated to the top of the barrel in 1797 and the look remained more or less the same to the end of the War of 1812. The musket gets its name from the first government armoury of the United States in Springfield, Mass.


Length 152cm, barrel 114cm, weigth 4.5kg. Without bayonet.

Pictures




ENGLAND

MQ107 - Brow Bess Musket, indian pattern - 430€

This lighter and shorter versio of the 1756 brow bess musket was first used by the East India Company armies - hence its name. Adopted by the board of ordnance in 1797, 3 millions of it were manufactured, and it equipped most of his majesty armies during the napoleonic wars.

It was used till 1850. The lock has the mark of the royal Tower manufacture.

Length 141cm, weigth 3.3kg. Comes with a bayonet.

Pictures


MQ103 - Baker Rifle - 450€

The Baker rifle is the first real British-made and conceived rifle. It was selected in 1800 to equip the new and experimental rifle corps. These units were employed as an addition to the skirmishers light companies of the battalions. They were used to weaken and disrupt the waiting enemy lines, but with the greater range and accuracy provided by the Baker rifle, british troops got a real advantage upon their french conterparts...

The Baker rifled musket is a .625-caliber rifle (16mm), has a 30inches barrel, fitted for a sword bayonet, is equipped with a rear sight, and has a very smooth trigger for accuracy. The essential cleaning equipment is stored in the gun's butt.

Length 120cm, weigth 4.0kg.The frizzen cover is case hardened, and the seamless tempered barrel is made of high carbon steel (type:BS970 no.080M40). The breech is threaded. The barrel is not rifled, though. Sold with its bayonet-sword (70cm long).

Pictures


MQ132 - Scottish Highland Pistol ( Murdoch Style) - 320€

Pistols were considered requisite items for the Highland soldier as early as the 1730s. By the 1740s the elegant pistol styles of Christie & Murdoch (armourers of Doune, Stirlingshire) had became the most sought after amongst Highland officers. The unique elements of the Doune pistols were the scroll or rams horn butt, fluted barrels at the breech and the octagonal flared muzzles.

Our replica represents one of the many copies made at that time by scottish pistol makers. The steel pistol was used in the ranks of Highland Regiments into the 1780s, when a less expensive (and less elegant) bronze pistol began to challenge the dominance of the steel version in the ranks of Britain's Highland Regiments. By the mid-1790s Highland Regiments had abondoned their pistols. Highland sergeants and men wore one steel pistol under the left arm, hung through the pistol's belt hook on a thin buff leather belt.

Also see our Claymore

Length 34cm. Pictures


MQ123 - Royal Navy Sea Service Pistol 1756 - 1815 - 320€

By the second half of the 18th century a model of sea service pistol began to dominate amongst the tars of Britain's navy.

The sea service pistols offered here (12 inch barrel) saw extensive use during the the French and Indian War, the American Revolution and the Nelson's adventures during the Napoleonic Wars. During the 1790s, the barrel was shortened to 9 inches making it more convenient in the tangled mêlées experienced by boarding parties. The shortened version is often referred to as the East India Co. Sea Service Pistol because they were the first to shorten it. This is the copy we offer.

Length 42cm, weight 1.1kg. Pictures


MQ124 - English Flintlock Dragoon Pistol - 320€

Inspired by Prussian designs of the time, this model of Dragoon pistol was common amongst Britain's mounted troops throughout the 18th Century. When a Light Dragoon pistol was developed in the 1760s, this pistol was relegated to the Heavy Dragoons.

However the true claim to fame of this elegant pistol came prior to this. During the War of the Austrian Succession (King George's War), British Dragoon regiments such as the Royal Dragoons, King's Dragoons, and Royal Scots Greys saw service in at the Battles of Dettingen and Fontenoy. At the victory at Dettingen, the Dragoons are noted as firing a volley from their pistols to check a charge by French cavalry. The defeat at Roucoux in 1746 and at Lauffeld in 1747 could have turned into disasters if it were not for the heroic actions of the British cavalry which held off the French while the army retreated.

Length 49cm, weight 1.2kg. Pictures



Blackpowder flasks

Made of copper, with a brass cork permitting four different powder doses, our flasks are copies of 19th century british ones. Fully functionnal.
MC101 - Fluted flask - 80€
Length 20cm, width 10cm, weigth 220g
MC102 - Plain flask - 70€
Length 20cm, width 8cm, weigth 200g
MC103 - Embossed flask - 80€
Length 21cm, width 9cm, weigth 200g